Amendment (2009) to OIML R 138:2007 • Vessels for commercial transactions Amendment (2009)

Section 5.2.3

5.2.3 Measuring container bottles

In addition to the requirements of 5.2.1, measuring container bottles shall be marked with one of the following marks, either on the lower rim or the bottom:

  • when filled to a constant level: the distance, expressed in millimeter, followed by the symbol mm from the brim to the filling level corresponding to the nominal capacity; or

  • when filled to a constant ullage: the number, expressed in millilitre () or centilitre () not followed by the symbol that is equal to the brim capacity.