creep magnitude, expressed in terms of at time obtained over the 30 minutes creep test.

2.1.5

difference between output at minutes and at minutes during creep test.

2.1.5.2

minimum dead load output return, expressed in terms of

2.1.5

humidity effect on maximum test load output, expressed in terms of

2.1.7

humidity effect on minimum test load output, expressed in terms of

2.1.7

temperature effect on minimum dead load output, expressed in terms of .

2.1.4

temperature effect on minimum dead load output, expressed in terms of per for class B, C and D or per for class A.

2.1.4

barometric pressure effect, expressed in terms of

2.1.6

barometric pressure effect, expressed in terms of mass () per .

2.1.6

maximum test load

R 60-1, 3.5.6

minimum test load

R 60-1, 3.5.12

minimum dead load output return, expressed in mass units ()

R 60-1, 3.5.10

load cell error, expressed in terms of

2.1.2

maximum capacity of the load cell

R 60-1, 3.5.5

minimum dead load of the load cell

R 60-1, 3.5.9

repeatability error, expressed in terms of

2.1.3

conversion factor, number of indicated units per verification interval,

2.1.2.4

MPE

maximum permissible error

R 60-1, 3.7.10

number of load cell verification intervals into which the load cell measuring range is divided

R 60-1 3.5.13

maximum number of load cell verification intervals

R 60-1, 3.5.8

apportionment factor

R 60-1, 3.7.2

reference indication (net test load), expressed in indication units

2.1.2.6

time when the initial indication at minimum test load is measured

2.1.5

time over the 30 minute creep test period after the initial indication () at minimum test load

2.1.5

temperature1, temperature2

2.1.4.2

load cell verification interval

R 60-1, 3.5.4

minimum load cell verification interval

R 60-1, 3.5.11

relative ,

R 60-1, 3.5.15,

relative DR,

R 60-1, 3.5.14